Hot water with as little CO2 emissions as possible?

Do you not have a gas connection and/or do you want to provide your hot water as sustainably as possible? An electric water heater, controlled with green energy, is a good solution. Especially when the water is preheated with a solar system. The water is preheated by the sun and then brought to the correct temperature by the electric boiler. You will then use the electricity needed for your hot water supply very efficiently.

Connecting an electric water heater is also very simple: there is no need to install a flue gas discharge and the water heater can be placed anywhere where there is water and electricity.

NB! An electric water heater does not emit harmful emissions and is therefore better for the environment. But, that only applies if green energy is used. If the electricity comes from power stations that use fossil fuels to generate electricity (grey electricity), our environment will not be any better.

Electric water heaters from A.O. Smith

The range of electric water heaters from A.O. Smith is characterized by a very compact structure with a capacity varying from 115 to 450 liters and is suitable for a relatively large tap water requirement. For example, a 300 liter electric water heater can continuously heat 1548 liters of water at Delta T = 28°C. Thanks to these properties, they are used in both domestic and commercial environments.

If you combine an electric water heater with a solar system, you have a truly sustainable solution for your hot water supply.

Dre Plus electric water heater with control panel
C

DRE Plus

The DRE Plus series consists of electric water heaters that are particularly suitable for industrial applications due to their power and capacity. The ‘Plus’ in this range is the display that provides various control and reading options.

Features

  • Capacity: 173 – 264 litres
  • Powerful electric water heater that produces large amounts of hot water in a short time
  • DWH capacity from 339 to 1132 litres/hour at 50°C depending on the chosen appliance
  • Because the unit has an external on/off function, you can control when to use external power supply. For example when you have supply from your PV panels
  • 3 to 9 incoloy heating elements with a maximum output of 50.4 kW
  • Cascade control of the heating elements allows a more even and responsive heating of the water
  • All elements and thermostats are fuse-protected
  • PermaGlas Ultra Coat second-generation glass coating technology helps to prevent corrosion
See Product
electric storage water heater DRE
C

DRE

DRE is a three phase electric water heater primarily used in commercial applications. This appliance is fitted with 3 to 9 Incoloy-sheated elements with a maximum rating of 54 kW. DRE has a cascade control of the electric elements to ensure steady and responsive heating.

Features

  • Capacity: 173 – 264 litres
  • All elements and thermostats are fuse-protected
  • PermaGlas Ultra Coat second-generation glass coating technology helps to prevent corrosion
  • Replaceable magnesium anode
  • Safety float switch
See Product
EES
C

EES

EES is a vertical electric water heater for residential or small commercial applications. This water heater is available with a capacity from 115 up to 450 litres. The appliance is fitted with 2 replaceable Incoloy-sheated elements. Each element is provided with an independant control thermostat.

Features

  • Capacity: 115 – 450 litres
  • Secondary protection is provided by a high-limit thermostat with manual re-set button
  • Safety float switch
  • Automatic switch regulates the elements to transfer a maximum of 3 kW
  • Replaceable magnesium anode
See Product